What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 01.07.2025 03:09

Here is a simplified AC power diagram.
But it can get overloaded, and no longer works.
It seems Mohan does not understand the difference between a comment and an Answer.
Women like what they hear while men like what they see, it that true?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
A circuit breaker is similar, but is resettable.
At one ohm, the resistor has a maximum of 1 watt power.
One
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
I post the exact comment here.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The bolt then partially travels down the line to your home.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One is “what exactly is in a ‘surge protector’ ? ”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Google can now generate a fake AI podcast of your search results - Ars Technica
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–16 [ OO OLAOYE OYEBODE ]
In schematic diagrams this is the symbol for a fuse:
Practice Report (6/9): Notes from the sideline - New York Giants
First Sentence:
Edit 2024–10.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The #1 Protein for Insulin Resistance, According to Health Experts - EatingWell
These are simplified answers to the original question, and does not change anything I wrote above.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Scientists uncover kidney-to-brain route for Parkinson’s-related protein spread - PsyPost
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(Dc diagram shown, AC is similar).
This device then solves the entire problem.
Lisa Rinna and Donna Kelce to Have a Mother-Off on the Traitors Season 4 - Vulture
An AC voltage/ current source, and an ac inductive load.
He then asserts :
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Have you ever really seen aliens or UFOs by yourself? Can you share your experience?
2024–10–10[John johnson John Johnson ]
The other is “what does a “fuse” do?”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Craig Breslow Discusses Red Sox’ Struggles, Future Plans - MLB Trade Rumors
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
a photo is worth a thousand words.
He then describes the function of a fuse.
Because the load is inductive, the current lags the voltage.(by a bit).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Upvotes:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
A fuse is a non-resetable over current circuit protector.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What is lightning?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Barnstars:
eight
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is where this question deviates from being a 'generic' question, and becomes more specific.
It also is a device that limits the change in current flow.
There are three different concepts here that are getting confused.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is 'the assistant's answer'
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is where the MOV conducts again, and dissipated the energy.
so, what happens?
nine
At least they know the answer if they wanted it.
what exactly is a ‘surge’ protector?
This one hit behind the barn.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There are two important concepts here.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
These devices are installed between the “hot” and “neutral” and protective ground.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then describes Rainy Season and Lightning.
What does a fuse do?
Now when you have a certain ac resistance, then a current flows in a loop.
the problem then depends on "how fast does the fuse operate?".
2024–10–14 [Omar Gharbi Omar Gharbi ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
but this device (an Inductor) … impedes the rapid changes in the current.
[image of Common-mode choke]
The third is lightning and “how it gets conducted into a home.”
For this case there are devices called Metal oxide varistors (MOV).
but I think this circuit , shows a few more pieces.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[old diagram got deleted by accident]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
The MOV will conduct when the voltage exceeds 50% of line voltage.